Usefulness of double plate fixation after failed ORIF for clavicle shaft fracture.

PURPOSE: We aimed to evaluate the clinical and radiological outcomes of double plate fixation for failed clavicle shaft fracture surgery. MATERIALS AND METHODS: We analyzed 14 patients who underwent double plate fixation due to plate failure after clavicle shaft fracture surgery from March 2016 to March 2021. The study used 3.5 mm locking compression plates for superior clavicle and anterior reconstruction in all patients. In addition, moldable allograft bone was used to fill the bone defect. Clinical and radiological evaluation was performed immediately, at 2 and 4 weeks, and 3, 6, 9, and 12 months postoperatively. The visual analog scale (VAS), University of California at Los Angeles (UCLA) shoulder scale, and American Shoulder and Elbow Surgeons (ASES) scores and range of motion of the shoulder were evaluated as clinical results. For radiological evaluation, anteroposterior, caudal, and cephalad views of both clavicles were used. Successful bone union was defined as complete adjoining of the fracture site through callus formation. RESULTS: Successful bone union was achieved in all patients, and the mean time to bone union was 16.7 ± 1.2 weeks (range, 12-24 weeks). Statistically significant improvement in forward flexion and external and internal rotation was observed from 135.5° ± 6.3, 45.2° ± 5.3, and 13° ± 2.3 preoperatively to 157.0° ± 9.3, 68.7° ± 6.3, and 9.8° ± 3.1 at the final follow-up, respectively. The VAS score improved from an average of 6.2 ± 2.8 preoperatively to 1.3 ± 0.7 at the final follow-up, which was statistically significant (P = 0.018). In addition, the ASES score significantly increased from a mean of 52.1 ± 6.3 points preoperatively to 83.6 ± 7.8 points at the final follow-up (P = 0.001). The average UCLA shoulder score was 16.7 ± 1.4 and 31.4 ± 2.2 points preoperatively and at the final follow-up, respectively, which was statistically significant (P = 0.001). CONCLUSION: Double plate fixation has shown good results after failed open reduction and internal fixation (ORIF) for clavicle shaft fractures. Therefore, in complicated situations after ORIF, double plate fixation is considered a surgical treatment option.

Induced membrane technique using beta-tricalcium phosphate for reconstruction of clavicle bone defect after fracture related infection - A case report.

The induced membrane technique (IMT) is among the most innovative reconstructive methods for clavicle defects after fracture-related infection (FRI). Herein, we report a case in which a clavicle bone defect after FRI was reconstructed with an autogenous cancellous bone graft mixed with ß-tricalcium phosphate (ß-TCP) in the second stage of the IMT. A 62-year-old male patient with left clavicle fracture underwent open reduction and internal fixation. Refracture occurred immediately after the implant was removed. The patient was diagnosed with FRI after reopen reduction and internal fixation and was then referred to our hospital. The surgery was performed using the IMT. In the second stage of the IMT, the bone defect was filled with an autogenous cancellous bone mixed with wool-type ß-TCP. At 8 months after surgery, the nonunion area had fused, and the patient had no restrictions in activities of daily living. The IMT with ß-TCP can be a reconstructive method for bone defects after clavicular nonunion.

Bipolar fracture of clavicle mimicking fracture dislocation of sternoclavicular joint: A case report.

INTRODUCTION AND IMPORTANCE: Bipolar fractures involving segmental fractures of the lateral and proximal clavicles are exceptionally rare, with only isolated cases documented in the literature. Such fractures may easily be overlooked during the initial presentation. CASE PRESENTATION: We present the case of a 35-year-old male with deformation in the middle segment of the clavicle following a road traffic accident (RTA). On radiography, the injury was initially thought to be a lateral clavicle fracture combined with sternoclavicular joint dislocation but was later changed to a bipolar clavicle fracture intraoperatively. The patient had an uneventful postoperative course with excellent functional outcomes 14 months after surgery. CLINICAL DISCUSSION: A bipolar clavicle fracture is the result of direct trauma to the shoulder region commonly following RTA. Bipolar injuries can be diagnosed based on clinical findings and radiographic evaluation using plain X-rays and aided by computed tomography (CT) scans in doubtful scenarios. With a paucity of guidelines regarding the management of bipolar clavicle fractures most reported cases have been managed operatively with open reduction and internal fixation using locking plates and screws. CONCLUSIONS: Due to its rarity, bipolar clavicle fractures can be easily missed, necessitating a high index of suspicion and detailed evaluation of suspected cases. Appropriate initial and definitive management through operative fixation can lead to optimal outcomes.

Shoulder and Neck Balance in Adolescent Idiopathic Scoliosis: Which Radiographic Indices are Reliable and Practical?

Introduction: Deformities of the spine and thorax in adolescent idiopathic scoliosis affect appearance. They are a cause of inferiority, affecting psychological well-being and the social life of the patients. To contribute to curve evaluation, planning in curve correction, and improving the post-operative aesthetics, many studies on the correlation between appearance and radiography in the assessment of shoulder and neck balance have been reported recently. In general, these studies did not clarify which indices are required to evaluate shoulder and neck balance. This study aimed to learn about indices to assess shoulder and neck balance in adolescent idiopathic scoliosis in correlation between clinical appearance and radiography. Materials and methods: This observational study recruited 50 patients with adolescent idiopathic scoliosis who were 12 to 18 years of age with Cobb angle >10°. Based on Pearson correlation coefficient, radiographic parameters such as coracoid height difference (CHD), clavicle rib intersection distance (CRID), clavicle angle (CA), clavicle chest cage angle difference (CCAD), and T1 tilt angle were evaluated in correlation with clinical shoulder and neck balance by difference of inner shoulder height (SHi), difference of outer shoulder height (SHo), and neck tilt angle. Results: SHi was moderately correlated with T1 tilt angle (r [hereafter] = 0.45), CA (0.47), and CHD (0.57), high-moderately correlated with CRID (0.64), very-highly correlated with CCAD (0.84). SHo was moderately correlated with T1 tilt angle (0.43), highly correlated with CHD (0.60), CA (0.63), and CRID (0.72), and very-highly correlated with CCAD (0.89). T1 tilt angle was high-moderately correlated with neck tilt angle (0.76). The correlation coefficients between clinical and radiographic shoulder and neck balance according to sex, BMI, type of main curve, severity of main curve did not change significantly. Conclusion: There was a very high correlation between SHo (shoulder tilt) and CCAD (0.89); the correlation between SHo and CRID was high-moderate (0.72), but CRID is easier than CCAD to evaluate on radiographs. On the other hand, T1 tilt angle, which is the easiest radiographic parameter to evaluate, had a high-moderate correlation with neck tilt angle (0.76) but a moderate correlation with SHo (0.43).

Serendipitous Discovery: A Case of Twin Congenital Pseudarthrosis of the Clavicle in Saudi Arabia and Literature Review.

Congenital pseudarthrosis of the clavicle (CPC) is a rare disorder with an unknown etiology, which is caused by a failure of the clavicle ossification nuclei union process. This is the first CPC twin instance documented in Saudi Arabia, and the fourth overall. In the 33rd week, a set of twins was born prematurely with respiratory distress syndrome. They were both admitted to the neonatal intensive care unit. X-rays of the chest were taken, and the clavicular deformity was discovered. Because the twins were born via a cesarean section, a traumatic clavicular fracture was ruled out. The family members were evaluated, and the same defect was discovered in the father as well, highlighting a genetic predisposition.

Acute brachial plexopathy secondary to surgical management of an atrophic nonunion of a clavicle fracture.

We report the case of a 28-year-old patient who developed acute transient brachial plexopathy secondary to surgical management of an atrophic clavicle nonunion. The treatment was conservative, with symptom resolution at 4 months after surgery. This is the first reported case with electromyographic and neuroconduction follow-up, demonstrating complete and spontaneous resolution of axonal damage. The limited number of cases reported in the scientific literature allows for exploring some underlying causes of the acute plexopathy depending on the nature of the non-union (hypertrophic or atrophic).

A systematic review of the treatment of primary acromioclavicular joint osteoarthritis.

Background: This systematic review aims to comprehensively summarise and present the available evidence for the treatment of primary acromioclavicular joint (ACJ) osteoarthritis (OA). Methods: Five databases were searched for studies investigating the management of ACJ OA. Included were studies with participants with clinical/radiological signs of primary ACJ OA, an intervention and included a functional outcome measure. Results: Forty-eight studies were included. Treatments consisted of physiotherapy (n = 1 study), medical only (n = 11) and operative management (n = 36). Operative studies included five comparative trials - physiotherapy versus surgery (n = 1) and open versus arthroscopic resection (n = 4). A total of 1902 shoulders were treated for ACJ OA, mean age (51 years), 58% male and mean follow-up (28.5 months). Treatment with injection showed a mean improvement of 50% in pain levels at follow-up (mean = 7.5 months). The commonest surgical procedure was arthroscopic excision of the distal clavicle and operative studies averaged 6 months of conservative management and a mean functional outcome of 87.8%. Conclusion: Studies varied in indication, intervention and quality but it did not provide evidence that both non-operative and operative interventions are effective. There was no significant difference between open or arthroscopic distal clavicle excision (DCE). Participants having between 0.5 and 2 cm of clavicle excised had good outcomes and those requiring concomitant shoulder procedures had similarly good outcomes.

Segmental Clavicle Fracture in a Polytraumatized Patient: Case Report.

Clavicle fracture represents 5% of the fractures in adults. However, segmental clavicle fractures are infrequent and have been understudied in the current literature. Cases have been reported showing adequate results with both surgical and conservative management, and yet, it has not been possible to reach a consensus regarding diagnosis or management of such condition. A patient with a middle and lateral segmental clavicle fracture is reported, after presenting multiple trauma in a road traffic accident, also suffering trauma to the right hemi body, multiple rib segmental fractures and hemothorax. After stabilization, he was taken to surgery for open reduction and internal fixation of the clavicle using a double plate technique, as it has been rarely described in the literature. The functional result was shown to be adequate and satisfactory in the postoperative follow-up. Despite the limited evidence available on the management of this type of pathology, surgical management is a valid option given the risk of non-union. The foregoing is concluded by the potential harm in patient functionality.

Correlation analysis and clinical significance of changes in upper thoracic vertebra tilt and clavicle angle pre- and post-operation.

The imbalance of the lateral shoulder is reflected by the clavicle angle (CA) in radiology. It remains unclear how to achieve postoperative lateral shoulder balance (LSB) after spinal deformity correction surgery. A retrospective analysis was conducted on AIS patients who underwent surgery by the same spine surgeon at our hospital from 2016 to 2020. A total of 110 patients with spinal deformity were included in the study to verify the correlation between the T1-T5 tilt angle and CA before and after surgery, as well as the relation-ship between the change in T1-T5 tilt angle before and after surgery and the change in CA before and after surgery. By comparing the correlation coefficients, it was found that there may not be a direct relationship between the pre- and postoperative tilt angles of T1-5 and CA, but their changes were closely related to the changes in CA. The change in T1 tilt angle after orthopaedic surgery was significantly correlated with the change in CA, with a correlation coefficient of 0.976, indicating a close relationship between T1 and the clavicle. As the vertebrae moved down, the correlation gradually decreased. In summary, this study suggests that there is a close relationship between T1-T5 and the clavicle and that the change in T1 tilt angle after spinal scoliosis correction surgery is significantly correlated with CA, which decreases as the vertebra moves down.

Arthroscopically Assisted Coracoclavicular (CC) Stabilization Using a Suture Button Device for Lateral Clavicle Fractures with CC Ligament Injury.

Background: Lateral clavicle fractures represent approximately 10-15% of all clavicle fractures. However, controversy exists regarding the optimal surgical treatment because of instability associated with the coracoclavicular (CC) ligament injury and a small lateral fragment. The purpose of this study was to evaluate the radiological and clinical outcomes of arthroscopically assisted CC stabilization using a suture button device for lateral clavicle fractures accompanied by CC ligament injury. Methods: A retrospective observational study involved six patients with modified Neer type IIB fractures, which were treated with the technique and followed for 12 months. Postoperative range of motion (ROM) and X-rays were evaluated every 3 months. Shoulder functional scores (University of California Los Angeles score, Japanese Orthopedics Association score) and visual analog scale (VAS) scores for pain (at rest, at night, and during motion) and for satisfaction were analyzed 12 months after surgery. Results: Early phase ROM recovery and excellent outcomes were achieved. All patients achieved bone union. Slight superior clavicle displacement and bone hole dilation occurred with no critical complications. Conclusions: Arthroscopically assisted CC stabilization with a suture button device for unstable lateral clavicle fractures can produce satisfactory radiological and clinical results.

[Digital study on proximal clavicle anatomical plate based on 3D printing technology].

OBJECTIVE: To explore feasibility of 3D metal printing technology combined with virtual design proximal clavicle anatomical plate. METHODS: A 52-year-old male healthy volunteer was retrospectively selected to design proximal clavicle anatomical plate system by using Mimics15.01,NX12.0 and other software. STL data were input into 3D printer to print 1:1 clavicle model and proximal clavicle anatomical plate. The fit of the plate was tested in vitro and the accuracy of screw position was evaluated by imaging. Printing time of model,nail path design and fabrication time of the anatomical plate at proximal clavicle were recorded. RESULTS: The 3D metal printing proximal clavicle anatomical plate fitted well to clavicle model,orientation of proximal clavicle locking screw was accurate,and X-ray and CT scan showed the screw position was good. Printing time of model,the time of nail path design,and the time of making anatomical plate of proximal clavicle were 120,15 and 300 min respectively. CONCLUSION: The proximal clavicular anatomical plate system based on 3D metal printing technology could achieve good lamination of proximal clavicular fracture plate and precise screw placement,providing a new and accurate surgical method for the treatment of the proximal clavicular fracture.

Study on the characteristics of increased mechanical stiffness according to changes in LCP shape to reinforce clavicle fractures.

The clavicle has various anatomic shapes unique to each individual. Additionally, with the increase in high-energy traumas such as sports injuries and traffic accidents, the patterns of fractures become complex and complicated. Thus, there is a need for a variety of shapes of locking compression plates (LCP) to accommodate different types of fractures and facilitate quicker rehabilitation. The aim of this study is to present different types of LCP that secure fracture fragments and distribute stress evenly, in comparison to typical anatomical LCPs, for reinforcing clavicle fractures. Three models were compared in this study: the typical shape, the center hole removed shape, and the double-curved wing shape. The DICOM (Digital Imaging and Communications in Medicine) file obtained from the computed tomography scan of the patient's clavicle was used to extract the three-dimensional (3D) clavicle structure. Finite element analysis (FEA) simulation was employed to analyze the structural changes of the LCP under external forces. A reinforced jig was used to apply the same type of external force to each LCP, and an experiment was conducted to analyze the mechanical impact of the LCP's structural characteristics. When comparing the stress values at the fracture zone point, resulting from the FEA simulation with applied bending forces, it was calculated that the stress dispersion effect was approximately ten times greater when transitioning from a typical LCP shape to a double-curved partial wing structure. Moreover, the ultimate stress increased 3.33 times, from 241.322 to 804.057 N, as the LCP design changed under cantilever bending conditions. This double-curved wing LCP design reduces stress concentration at the fracture site and minimizes stress in the fracture area when subjected to cantilever bending forces. Consequently, this newly designed LCP has the potential to decrease complications related to the plate and accelerate rehabilitation protocols.

Complications and clinical outcomes with minimally invasive plate osteosynthesis (MIPO) technique for midshaft clavicle fractures: a systematic review and meta-analysis.

Background: Clavicle fractures are among the most common upper limb fractures in adults, with the midshaft region being the most frequently affected site. Minimally invasive plate osteosynthesis (MIPO) has emerged as an alternative to the traditional open reduction and internal fixation (ORIF) technique, offering potential advantages. The purpose of this study was to conduct a systematic review to explore the results of this technique in the existing literature, with emphasis on the occurrence of surgical complications and functional outcomes and also to provide a comprehensive comparison of MIPO and ORIF in the management of midshaft clavicle fractures. Methods: We conducted a systematic review to evaluate the complication incidence and clinical outcomes of MIPO for midshaft clavicle fractures. We searched PubMed/Medical Literature Analysis and Retrieval System Online (MEDLINE), Scopus, the Cochrane Database of Controlled Trials, and the Cochrane Database of Systematic Reviews databases without language or date restrictions. Studies focusing on midshaft clavicle fractures treated with MIPO were included, while other clavicle fractures and nonclinical studies were excluded. The risk of bias was assessed using the Methodological Index for Nonrandomized Studies criteria and the Risk of Bias Tool 2 Cochrane tool. Data synthesis included qualitative analysis, and if applicable, quantitative analysis and meta-analysis. Adherence to Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines ensured reporting quality. Results: A total of 107 studies were initially identified, after applying inclusion and exclusion criteria, 22 studies were included for data extraction. These studies involved the evaluation of 714 clavicles treated with the MIPO technique. Of the 714 MIPO cases, 11 cases of implant failure, 5 nonunions, 2 infections, and 28 cases with neurological impairment were observed. Quantitative analysis comparing MIPO with ORIF revealed that MIPO had significantly shorter surgery time (mean difference -12.95, 95% confidence interval [-25.27 to -0.63], P = .04) and lower occurrence of numbness (odds ratio 0.29, 95% CI [0.15-0.56], P = .0002) compared to ORIF. Time to bone union, functional outcomes, and other complications were similar between MIPO and ORIF at the final follow-up. An overall moderate risk of bias was found across the studies. Conclusion: The MIPO technique yields good and comparable results to ORIF for midshaft clavicle fractures. Additionally, the MIPO technique may offer advantages such as reduced surgical time and lower chances of neurological impairment.

Intra-pulmonary migration of a clavicle osteosynthesis pin: a case report.

BACKGROUND: Fractures of the clavicle are common injuries, which often require reduction and internal fixation. Although Kirschner pins have been commonly used to treat these fractures with good results, migration of these devices may result in severe internal lesions. CASE PRESENTATION: We report herein the case of 61-year-old man, who presented for intrapulmonary migration of a Kirschner pin, 25 years after closed reduction and fixation of a clavicle fracture. CONCLUSION: Migration of an osteosynthesis pin can be lethal. Patients with osteosynthesis pins, should have a regular follow, until the removal of the wires.

Rare case of chondrosarcoma of the manubrium sterni: Management challenges and insights (a surgical case report).

INTRODUCTION AND IMPORTANCE: Chondrosarcoma of the manubrium sterni is an exceedingly rare localization of chondrosarcoma. Its treatment poses a significant therapeutic challenge due to the tumor's proximity to the mediastinal organs and the clavicles. This challenge is magnified when the inner ends need to be resected due to tumor contact with the sternoclavicular joints and, more critically, during the reconstruction of the thoracic wall. CASE PRESENTATION: We present the case of a 71-year-old female with a 45x42x51 mm chondrosarcoma of the manubrium sterni, extending to both sternoclavicular joints. The diagnosis was confirmed cytologically and histologically after an ultrasound-guided biopsy. A surgical strategy involving en bloc resection of the manubrium sterni, the internal ends of both clavicles, and the first two ribs, followed by sternal reconstruction using a synthetic manubrial plate and titanium costal staples without clavicular bridging, was indicated and executed. CLINICAL DISCUSSION: This case outlines the surgical considerations and techniques adopted for this complex procedure, emphasizing the operative planning and interdisciplinary collaboration required for a successful outcome. CONCLUSION: At 18 months post-surgery, the patient demonstrated favorable clinical and radiological progress, indicating a positive response to the treatment strategy employed.

Surgical treatment of a nonunion following clavicle osteotomy in a child with a history of Erb's palsy: A case report.

INTRODUCTION AND IMPORTANCE: Erb's palsy defined as muscle weakness and loss of motion caused by a nerve condition in the shoulder and arm. Children with Erb's palsy might underwent clavicle osteotomy as an appropriate surgical treatment method. However, few number of these patients who underwent clavicle osteotomy experienced nonunion and complained of shoulder deformity and pain. The aim of the present case report was to present new surgical treatment of a nonunion following clavicle osteotomy in a child affected by Erb's palsy. CASE PRESENTATION: A six years old boy with a history of Erb's palsy who underwent clavicle osteotomy at age of 6 months was referred to hospital. There was a nonunion following clavicle osteotomy. The patient had right shoulder deformity and complained of its-related pain. To correct a nonunion following clavicle osteotomy in this case, middle third fibula auto grafting and fixing it to the cite of clavicle nonunion by pins was used. After five months of follow-up, a clavicle nonunion and shoulder deformity was thoroughly corrected. CLINICAL DISCUSSION: As clavicle osteotomy, the most commonly surgical method for Erb's palsy, has been demonstrated to not work effectively and cause nonunion in some cases, a new surgical method for correcting clavicle nonunion other than repeated clavicle osteotomy is needed. In the present case report, fibula auto grafting and fixing it to the cite of clavicle nonunion by pins was applied and demonstrated remarkable improvement. CONCLUSION: Totally, use of fibula auto grafting and fixing it to the cite of clavicle nonunion by pins might be an effective surgical treatment for such cases.

Sternoclavicular joint reconstruction for traumatic acute and chronic anterior and posterior instability: Patient-reported outcomes at a minimum of 2 years.

Background: Instability of the sternoclavicular joint (SCJ) is a rare problem that is often treated closed, with few published outcomes of surgical treatment with tendon graft reconstruction. Methods: We reviewed a consecutive series of patients who underwent tendon graft reconstruction for SCJ instability over a 7-year period. Cases with acute fractures or fewer than 2 years of follow-up were excluded. Pre- and postoperative function and pain were assessed using Single assessment numeric evaluation (SANE), simple shoulder test (SST), and visual analog scale (VAS) outcome measures. Results: Thirty cases were included, with 27 (90%) available for follow-up at a minimum of 2 years postoperatively. SANE scores improved from a median of 40 to 90. SST scores improved from a median of 3 positive responses to a median of 12 on a 12-point scale. VAS scores decreased from a median of 7 to 0 points. One patient underwent reoperation for recurrent instability and wound dehiscence. Three (11%) patients did not achieve a minimum 30% of maximum possible improvement in SST scores. Conclusions: Tendon graft reconstruction for SCJ instability is a safe procedure with a low complication rate and statistically and clinically significant improvements in patient-reported outcome measures at 2-year minimum follow-up. Level of evidence: Level IV: Therapeutic.

Clavicle Fracture Site Surgical Contouring: A Case Report.

Clavicle fractures are frequent injuries accounting for approximately 4% of all fractures in adults with about 35% occurring in the shoulder region among which midshaft fractures are the most common (>66%). Nonsurgical management is the treatment of choice for most clavicle fractures; however, poor functional and aesthetic outcomes may result from nonunion, symptomatic malunion, and aesthetic impairment which are the most common complications. A young woman was referred to our clinic for a "Step Deformity" resulting after primary, nonsurgical treatment of a midshaft clavicle fracture. Residual deformity was corrected with a novel simple and little invasive approach. Midshaft clavicle fractures typically only require conservative nonsurgical treatment, nevertheless suboptimal outcomes may occur. Selective osteotomies and fixation are deemed too invasive when only cosmetic impairment of the clavicle contour is present without any functional or sensitive damage and most patients are discouraged from undergoing surgery. Thus far, no specific focus on this topic, nor exploration of possible correction can be found in the published literature. These residual deformities may be very noticeable sometimes and cause psychological distress and social life impairment. Despite no related functional impairment, this deformity should still be addressed, to improve patients' quality of life.

Lateral clavicle fracture-plating options and considerations.

Clavicle fractures are among the most prevalent types of fractures with numerous treatment strategies that have evolved over time. In the realm of lateral-third clavicle fracture management, several surgical methods are available, with plate and screw constructs being one of the most frequently employed options. Within this construct, numerous choices exist for fixing the fracture. This editorial provides an overview of the common plate options utilized in the management of distal third clavicle fractures underscoring the critical considerations and approaches that guide clinicians in selecting the most appropriate fixation techniques, considering the complex landscape of clavicle fractures and their challenging management.